# My device config
|Config|Value|Description|
|------|-----|-----------|
|Jsonver| 1.1.0| json version|
|module| WB3S| Module coosed for the light|
|cmod| rgbcw| Color Model (5) rgbcw|
|dmod| 0| Color driver mode: 0-> PWM|
|cwtype| 0| Color temperature drive mode: 0 -> CW|
|onoffmode| 1| Is there a gradient when switching 1 -> turn ondirectly|
|pmemory| 1| Is there a power off memory 1 -> save data app|
|ctrl_pin| 7| CTRL pin|
|ctrl_lv| 0| CTRL pin low active|
|title20| 0| -> don't support T20|

|Light config|Value|Description|
|------|-----|-----------|
|defcolor| b| light color afer connected |
|defbright| 80| light default brightness after connected|
|deftemp| 100| light default temperature|
|cwmaxp| 100| Maximum power configuration of cold and warm light mixing|
|brightmin| 10| Minimum brightness: 1-100|
|brightmax| 100| Maximum brightness: 1-100|
|colormax| 100| Maximum color?: 1-100|
|colormin| 10| Minumum color?: 1-100|

|Connection config|Value|Description|
|------|-----|-----------|
|wfcfg| spcl| Low power / flash, value: spcl,prod|
|rstbr| 80| light brightness while connecting|
|rstcor| b| light color while connecting|
|rstmode| 0| light reset pairing mode |
|rstnum| 3| number of times required to reset by switching on off|
|rsttemp| 100| light brightness while connecting|

|PWM config|Value|Description|
|------|-----|-----------|
|pwmhz| 1000| PWM frequency|
|r_pin| 9| red light pin|
|r_lv| 0| red light low active|
|g_pin| 24| green light pin|
|g_lv| 0| green light low active|
|b_pin| 26| blue light pin |
|b_lv| 0| blue light low active|
|c_pin| 8| cold light pin |
|c_lv| 0| cold light low active |
|w_pin| 6| warm light (motor) pin|
|w_lv| 1| warm light (motor) high active|